Temperature hysteresis: programmable 0.1ºC to 9.9ºC in 0.1ºC increments
Supplied as standard with 2m cable terminating in RJ45 for direct connection
Humidity Sensor
Supplied with 2m cable terminating in RJ45 for direct connection to a monitoring device
Monitoring range: 30%-90%
Humidity hysteresis: programmable 0.1% RH to 9.9% RH in 0.1 increments
Water Leak Detection Sensor - Rope & Contact type
W 74mm x H 50mm x D 27mm, with standard rope length of 5m
5v power supply from Sinetica branded monitoring devices with supply current of 20mA
Standard control cable length is 2m with RJ45 connector
Control housing made from tough ABS plastic
Smoke Sensor
Supplied with 2m cable terminating in RJ45 for direct connection
Contact type with test button
Security
IP Cameras
CCTV camera with -30º - +60º
3.0 Megapixel resolution
Power over Ethernet and Internet Ready
Interfaces with our Enterprise Device Manager software
Triggers on motion and cabinet door access
64MB of built in storage
Clips and images can be transferred to FTP or SMB/CIFS
Door Contact - microswitch & magnetic
Supplied with 2m cable terminating in RJ45 to the monitoring and control devices, which use the relay contacts of normally open and normally closed to trigger alarms via the network
Keypad
5x2 matrix type
Powered directly from port on rear of monitoring and control device
Supplied with 2m ribbon cable with 450mm of plastic flexible conduit for protection within the cabinet
PIR Sensor
Can be powered directly from Hawk-i², Hawk-i³, Eagle -i or external power supply
Supplied with 2m cable terminating in RJ45
Contact type
Flashing Beacon - with & without sounder
Flashing strobe light. Available in blue or red
Powered directly from monitoring and control device with 2m cable terminating in an RJ45
Configurable alert sound options on switch settings and volume control (with sounder only)